Nikon have
released a firmware upgrade for the Nikon D700, this latest firmware for the D700
is version 1.01 and includes the following improvements and fixes:
- When Custom Setting a4 Focus tracking
with lock-on was set to Off in Continuous-servo AF, the lens drive moved
gradually without achieving focus. This issue has been resolved.
- When the Speedlight SB-800 was
mounted on the camera with flash mode set to Distance-priority manual (GN)
mode, and then the exposure meters were reactivated or the camera was turned
on, the distance information displayed on the SB-800 changed. This issue
has been resolved.
- When the Multi-Power Battery
Pack MB-D10 was mounted on the camera and an EN-EL3e battery inserted in the
camera but no batteries inserted in the MB-D10, and SB-900 flash mode set to
TTL auto flash mode, the flash mode changed to A mode when the
exposure meters turned off or were reactivated, or the camera was turned off or
on. This issue has been resolved. (This issue has also been
resolved with SB-900 firmware Ver. 5.02.)
- An issue that, in extremely
rare cases, resulted in noticeable black dots in images captured with Long exp.
NR
in the shooting menu set to On has been resolved.
- Manamah, displayed in the Time zone
options for the World time item in the setup menu, has been changed to Manama.
Go to the Nikon D700 Firmware Ver 1.01 page